CommandLineOptionCurrentListOptionIndex Property

public int CurrentListOptionIndex { get; }

Public ReadOnly Property CurrentListOptionIndex As Integer
	Get

partial class Examples
{
  public static Rhino.Commands.Result CommandLineOptions(Rhino.RhinoDoc doc)
  {
    // For this example we will use a GetPoint class, but all of the custom
    // "Get" classes support command line options.
    Rhino.Input.Custom.GetPoint gp = new Rhino.Input.Custom.GetPoint();
    gp.SetCommandPrompt("GetPoint with options");

    // set up the options
    Rhino.Input.Custom.OptionInteger intOption = new Rhino.Input.Custom.OptionInteger(1, 1, 99);
    Rhino.Input.Custom.OptionDouble dblOption = new Rhino.Input.Custom.OptionDouble(2.2, 0, 99.9);
    Rhino.Input.Custom.OptionToggle boolOption = new Rhino.Input.Custom.OptionToggle(true, "Off", "On");
    string[] listValues = new string[] { "Item0", "Item1", "Item2", "Item3", "Item4" };

    gp.AddOptionInteger("Integer", ref intOption);
    gp.AddOptionDouble("Double", ref dblOption);
    gp.AddOptionToggle("Boolean", ref boolOption);
    int listIndex = 3;
    int opList = gp.AddOptionList("List", listValues, listIndex);

    while (true)
    {
      // perform the get operation. This will prompt the user to input a point, but also
      // allow for command line options defined above
      Rhino.Input.GetResult get_rc = gp.Get();
      if (gp.CommandResult() != Rhino.Commands.Result.Success)
        return gp.CommandResult();

      if (get_rc == Rhino.Input.GetResult.Point)
      {
        doc.Objects.AddPoint(gp.Point());
        doc.Views.Redraw();
        Rhino.RhinoApp.WriteLine("Command line option values are");
        Rhino.RhinoApp.WriteLine(" Integer = {0}", intOption.CurrentValue);
        Rhino.RhinoApp.WriteLine(" Double = {0}", dblOption.CurrentValue);
        Rhino.RhinoApp.WriteLine(" Boolean = {0}", boolOption.CurrentValue);
        Rhino.RhinoApp.WriteLine(" List = {0}", listValues[listIndex]);
      }
      else if (get_rc == Rhino.Input.GetResult.Option)
      {
        if (gp.OptionIndex() == opList)
          listIndex = gp.Option().CurrentListOptionIndex;
        continue;
      }
      break;
    }
    return Rhino.Commands.Result.Success;
  }
}

Partial Class Examples
  Public Shared Function CommandLineOptions(ByVal doc As Rhino.RhinoDoc) As Rhino.Commands.Result
    ' For this example we will use a GetPoint class, but all of the custom
    ' "Get" classes support command line options.
    Dim gp As New Rhino.Input.Custom.GetPoint()
    gp.SetCommandPrompt("GetPoint with options")

    ' set up the options
    Dim intOption As New Rhino.Input.Custom.OptionInteger(1, 1, 99)
    Dim dblOption As New Rhino.Input.Custom.OptionDouble(2.2, 0, 99.9)
    Dim boolOption As New Rhino.Input.Custom.OptionToggle(True, "Off", "On")
    Dim listValues As String() = New String() {"Item0", "Item1", "Item2", "Item3", "Item4"}

    gp.AddOptionInteger("Integer", intOption)
    gp.AddOptionDouble("Double", dblOption)
    gp.AddOptionToggle("Boolean", boolOption)
    Dim listIndex As Integer = 3
    Dim opList As Integer = gp.AddOptionList("List", listValues, listIndex)

    While True
      ' perform the get operation. This will prompt the user to input a point, but also
      ' allow for command line options defined above
      Dim get_rc As Rhino.Input.GetResult = gp.[Get]()
      If gp.CommandResult() <> Rhino.Commands.Result.Success Then
        Return gp.CommandResult()
      End If

      If get_rc = Rhino.Input.GetResult.Point Then
        doc.Objects.AddPoint(gp.Point())
        doc.Views.Redraw()
        Rhino.RhinoApp.WriteLine("Command line option values are")
        Rhino.RhinoApp.WriteLine(" Integer = {0}", intOption.CurrentValue)
        Rhino.RhinoApp.WriteLine(" Double = {0}", dblOption.CurrentValue)
        Rhino.RhinoApp.WriteLine(" Boolean = {0}", boolOption.CurrentValue)
        Rhino.RhinoApp.WriteLine(" List = {0}", listValues(listIndex))
      ElseIf get_rc = Rhino.Input.GetResult.[Option] Then
        If gp.OptionIndex() = opList Then
          listIndex = gp.[Option]().CurrentListOptionIndex
        End If
        Continue While
      End If
      Exit While
    End While
    Return Rhino.Commands.Result.Success
  End Function
End Class

import Rhino
import scriptcontext

def CommandLineOptions():
    # For this example we will use a GetPoint class, but all of the custom
    # "Get" classes support command line options.
    gp = Rhino.Input.Custom.GetPoint()
    gp.SetCommandPrompt("GetPoint with options")

    # set up the options
    intOption = Rhino.Input.Custom.OptionInteger(1, 1, 99)
    dblOption = Rhino.Input.Custom.OptionDouble(2.2, 0, 99.9)
    boolOption = Rhino.Input.Custom.OptionToggle(True, "Off", "On")
    listValues = "Item0", "Item1", "Item2", "Item3", "Item4"

    gp.AddOptionInteger("Integer", intOption)
    gp.AddOptionDouble("Double", dblOption)
    gp.AddOptionToggle("Boolean", boolOption)
    listIndex = 3
    opList = gp.AddOptionList("List", listValues, listIndex)
    while True:
        # perform the get operation. This will prompt the user to
        # input a point, but also allow for command line options
        # defined above
        get_rc = gp.Get()
        if gp.CommandResult()!=Rhino.Commands.Result.Success:
            return gp.CommandResult()
        if get_rc==Rhino.Input.GetResult.Point:
            point = gp.Point()
            scriptcontext.doc.Objects.AddPoint(point)
            scriptcontext.doc.Views.Redraw()
            print "Command line option values are"
            print " Integer =", intOption.CurrentValue
            print " Double =", dblOption.CurrentValue
            print " Boolean =", boolOption.CurrentValue
            print " List =", listValues[listIndex]
        elif get_rc==Rhino.Input.GetResult.Option:
            if gp.OptionIndex()==opList:
              listIndex = gp.Option().CurrentListOptionIndex
            continue
        break
    return Rhino.Commands.Result.Success


if __name__ == "__main__":
    CommandLineOptions()